Are you bothered by the red light on your Spectrum router? You’ve reached the right post wherein we have covered the reasons along with the best solutions for the Spectrum router blinking red light issue. Bear in mind that it is a very common issue experienced by many router users across the globe. Resolving it is also an easy task. Read the post and get your router up and working in no time.
Why is Spectrum Router Blinking Red Light?
The Status LED on your Spectrum router may blink in red color. The primary reason why you see this color on your router is that the router is unable to connect to the internet. Apart from this, technical glitches in the router can also be a reason for this.
Now that you have an idea about what could have happened, let us help you get rid of the Spectrum router blinking red light.
Let’s Fix the Red Light on the Spectrum Router
You should get in touch with the ISP to confirm if there’s an internet outage going on. This is because the router will get no internet if there’s an internet issue from the ISP end. Let the issue get resolved first. You will no longer find your Spectrum router blinking in red color once the internet outage is over. If there’s no outage then apply the fixes discussed below.
Try Rebooting the Spectrum Router
Try the versatile solution that helps fix many minor to major issues with technical devices. We’re talking about the reboot process. Rebooting helps to remove the temporary glitch in the router and also gives the network connection a fresh start. Without thinking any further about it, power off your Spectrum router. Unplug it from the socket. Let it stay in this state for a while. Plug in the router after waiting for about 5 minutes. Turn it on and observe the light on it. Is the light still blinking in red color? Use the next hack.
Fix the LAN Connection
We mentioned earlier that the primary reason for the Spectrum router blinking red light is that it has trouble connecting to the internet. Let’s address this problem now. The router connects to the modem with the help of a LAN cable. Check the LAN connection now. A faulty cable or loose connection won’t help the router get internet from the modem. While you’re checking the connection make certain that the cable is not inserted loosely. Make a solid connection to avoid issues. If you see any cut on the cable or if the cable is damaged, then get it replaced right now. Use another cable which is in good condition to join the two devices.
Check the Electricity Supply
An unstable power supply to the WiFi router or the ISP modem can be a reason why the router is not receiving proper internet. We suggest you examine the power connection to both devices now. Have a good look at the power adapters and the power sockets of both devices i.e. the Spectrum router and the modem. Fix any loose connection and repair or replace anything that’s damaged. Simply put, see to it that the router as well as the modem are receiving a consistent and stable power supply.
Perform a Factory Reset
By any chance the Spectrum router blinking red light issue does not leave you even after you’ve applied all the above given solutions, reset the router. Remove its connection with the modem first by taking out the LAN cable. After that, press and hold the Reset button that’s located inside a hole. You’ll need a sharp and pointed object to press the button. As soon as you release the button the router will reboot itself. It will have the default factory settings restored now that the customized settings are erased.
Set up your Spectrum router once again using the IP 192.168.0.1 on a web browser. Carry out the setup instructions and you are good to go.
Let’s Wrap Up
Spectrum router blinking red light won’t trouble you anymore after you have given a shot at the troubleshooting fixes presented in this post. You won’t have any trouble connecting to its internet as well. Connect and enjoy seamless internet.