Can’t Find Netgear_ext on My iPhone to Connect WiFi

If you are trying to connect iPhone to Netgear_ext but it is not showing up. You have plugged in your extender, checked all the lights but still it is not working. You are not alone. This usually happens because of small setup glitches like being too far from the extender, old network info stored on your iPhone or a small WiFi glitch.

In this guide, we will go through some of the steps that will help your iPhone to find and connect to Netgear_ext iPhone quickly, without messing with complicated settings.

Why Can’t Your iPhone See Netgear_ext?

Firstly, it is important to understand why this problem happens. Most of the times this is because of configuration or connectivity issue. Some of the common reasons are:

• The extender is not completely powered on. The small LED lights are of great use. If they are not showing the expected colors, the extender is not ready.
• May be your iPhone’s WiFi cache is acting up. IPhones sometimes stick to the old networks.
• Frequency bands might be confusing your phone. Extenders usually broadcast in 2.4GHz and 5GHz.
• If you are too far from the router then the signals will not be visible.

So, let’s troubleshoot this mess.

Step 1: Check the Extender’s Status

Before doing anything else make sure to check your extender. Is it powered on or not? Are the LEDs blinking? Most Netgear_ext devices have a link LED that tells you if they are connected to your main router. Itf the LED lights are not green then that is the very first problem.

Tip: This issue can be fixed just by unplugging the extender, wait for 10 seconds and plug it back in. You have to wait until the lights become green. This method is really effective.

Step 2: Forget Old Networks on Your iPhone

It is possible that may be your iPhone is holding onto networks and is unable to connect to any other network. This can hide the Netgear_ext iPhone network from showing up. Here is what you can do:

• Make sure to go to the wifi settings.
• Tap the little i next to networks you don’t use.
• Select Forget This Network.

Repeat the same for any old extenders or duplicate WiFi names. After this, refresh your WiFi list and see if Netgear_ext iPhone is showing.

Step 3: Move Closer to the Extender

Distance is one of the common reasons. May be your iPhone is just out of the ideal spot. Make sure to move closer to your extender. If the network appears now, you know it is a range problem. Sometimes, walls, microwaves or thick furniture can block the signals and that to especially 5GHz.

Pro tip: If 5GHz is acting weird then you can connect to 2.4GHz first. The Netgear_ext iPhone usually broadcasts both bands and some iPhones prefer 2.4GHz when the signal is weak.

Step 4: Reboot Your iPhone

A simple iPhone reboot can fix your wifi errors. Press the power button, slide to power off, wait 10 seconds and turn it back on. Then check if Netgear_ext iPhone shows up.

Step 5: Reset the Extender if Needed

If the above mentioned steps don’t work then it is the ideal time to go for reset your Netgear extender. The reset button is generally a small button at the back of an extender. You have ot press and hold it for 10 to 15 seconds till the time lights start blinking.  Then do the setup again. It can be annoying but often necessary when your Netgear_ext iPhone does not appear.

Step 6: Use the Netgear App

If you are still struggling then you can use the Netgear app. You have to download it from the App Store, open it and follow the setup wizard. The app will help your iPhone to find the extender and even rename the network if it is causing conflicts.

Quick Tips to Avoid This Problem

• The extender should be placed in an open area and not behind any kind of furniture.
• The software of your iPhone’s should be updated. You may notice WiFi errors on older iOS versions.
• Do not keep the same network name of your router and extender to avoid conflicts. If your main router and extender have the same name, iPhones sometimes get confused.

FAQs

1. Why doesn’t my iPhone see Netgear_ext after setup?

Most of the time, the extender is not fully connected or your iPhone is stick to the old networks. Check the lights, move closer and forget any old WiFi.

2. Can I connect Netgear_ext to my iPhone without the app?

Yes. Just go to Settings > WiFi, find the Netgear_ext network, and join. The app just makes it easier if something goes wrong.

3. What if the network shows up but won’t connect?

Check the password first. If it’s correct, restart your iPhone and extender. Usually that fixes it.

4. Do I need to reset the extender every time my iPhone doesn’t see it?

Nope. Reset is only for stubborn cases. Most times, forgetting networks or moving closer solves it.